You recently viewed

JE80-2100/13

The Combijet JE80-2100 Electric Ultra High Pressure Water Blaster (2100 bar) can be used for industrial strength cleaning in many industries including construction, marine, mining, aviation, energy, and oil & gas.


The JE80-2100 comes with a range of key features including protection equipment such as overload relay protecting the motor from overload and inlet pressure sensor protecting the pump from running dry and overheating; inlet automation sensor control for shutoff in case of water shortage; a stainless steel filtration system; forklift pockets and lifting points on frame and a feed pump complete with pipework; an easy to use control panel; stainless steel SS316 water tank and electric box; and CE electric components produced in Italy.


Be it the removal of tough and non-water soluble dirt off marine vessels; as well as the hydroblasting of vessels (hulls and cargo holds) and steel structures and surfaces at shipyards; the blasting of metal surfaces (scaffolding, support bards, structures, pipes, drums) on construction sites; the blasting of oil rig structures and runways; the cleaning and blasting of ready-mix concrete vehicles, tanks and silos; or the cleaning and blasting of a range of equipment within oil & gas facilities, the JE80-2100 is a highly effective piece of cleaning machinery.


The JE80-2100 can also be used within the rubber processing industry for the removal of latex, SBR and product residues from tubes, pipes, heat exchangers, reactors and tanks; surface preparation for painting; removal of paint, varnish and rust; removal of rubber from airport runways; cleaning of deposits, removal of metal oxidation, ceramic and sand core materials in foundries; blasting and decontamination of fuel capsules, skips, tubes and equipment as well as blasting of transformers for removal of chemical/acid deposits in power stations; and the elimination of mill scale, weld slag and rust from drains, pipes and new vessels.

Our Features

  • Pressure Relief Valve
  • Rupture Safety Disc
  • Electric Control Panel, complete with contactors and switching components
  • Flexible coupling between motor and pump, with protective cover
  • Pressure Gauge
  • Inlet automation sensor control, for shutoff in case of water shortage
  • Electric Oil Resistant Cable – 5m length
  • 1 x Feed pump, complete with pipework
  • Stainless steel filtration system
  • Synthetic PE water tank
  • Forklift pockets and lifting points on frame
  • Operator, service and spares parts manual
  • 1 x UHP Hose – Length=20m
  • 1 x Dump Gun, complete with Lance
  • 1 x Nozzle Carrier + Fan Jet Nozzle

Specifications

PUMP SPECIFICATION JE80-2100/13
Max. Working Pressure 2100 bar / 30450 PSI
Flow Rate 13 lpm / 3.43 GPM
MOTOR SPECIFICATION  
Power Rating 55 kW 
Power Supply 440V/60Hz/3-phase
Standard IP55
FRAME SPECIFICATION  
Material Hot dip Galvanized 
Mounting Stationary Base – Open Frame
Paint

Epoxy Paint System 2 component 

Primer Interzinc 22/ Inorganic Zinc Rich Silicate

Intermediate coat - Intergard 400/Epoxy

Top coat Interthane 990 / Polyurethane

Mounting Stationary Base – Open Frame
MACHINE DIMENSIONS (LXWXH) 2250 x 1450 x 1750 mm
Weight 1750 kg

Click here for the product pdf brochure

RELATED PRODUCTS

CONTACT OUR SALES TEAM FOR EVEN MORE INFORMATION!