You recently viewed


The electric driven Combijet JD90-2500/16 Ultra-High Pressure Water Blaster with 2500 bar working pressure and 16 l/min flow rate is a heavy duty cleaning machine designed for use within heavy industries.

It not only eliminates hard dirt from surfaces of storage tanks, pipes, drums, structures, floors and walls; but also removes tough dirt such as clay, soil and concrete residue from machinery, chains and mixing shafts.

The JD90-2500/16 gets rid of fresh concrete deposits from mix trucks and pumps; eradicates loose paint, latex, emulsion and labels from containers and drums; and cleans weather dirt from surfaces of buildings.

Key features of the JD90-2500/16 are its control box with start/off/emergency shutoff functionality and warning pilot lights; flexible coupling between engine and pump with protective cover; pressure gauge; inlet automation sensor control for shutoff in case of water shortage; feed pump complete with pipework; stainless steel filtration system (first stage 20µ/second stage 5µ); synthetic PE water tank; ultra-high pressure 20 meter hose (with water pressure of 3000 bar); dump gun with lance; fan jet nozzle; pressure relief valve; rupture safety; forklift pockets and lifting points on frame; pressure relief valve; and rupture disk with 2760 working pressure.

Our Features

  • Pressure Relief Valve
  • Rupture Disc, rated @ 2760 bar
  • Fuel tank
  • Control box for Start/Off/Emergency Shutoff functions, and warning pilot lights
  • Flexible coupling between engine and pump, with protective cover
  • Pressure Gauge
  • Inlet automation sensor control, for shutoff in case of water shortage
  • 1 x Feed pump, complete with pipework
  • Stainless steel filtration system, first stage 20µ/second stage 5µ
  • Synthetic PE water tank
  • Forklift pockets and lifting points on frame
  • Operator, service and spares parts manual
  • 1 x UHP Hose– 20m / WP=3000 bar
  • 1 x Dump Gun, complete with Lance
  • 1 x Nozzle Carrier + Fan Jet Nozzle


Working Pressure 2500 bar / 36250 psi
Flow rate 16 lpm / 4.23 GPM
ENGINE SPECIFICATION Diesel engine drive
Make Cummins
No. of cylinders 6
Cooling Water-cooled
Standard Engine setup, including Radiator, Starter and Exhaust silencer  
Material Hot dip Galvanized 
Mounting Stationary Base Frame

Epoxy Paint System 2 component 

Primer Interzinc 22/ Inorganic Zinc Rich Silicate

Intermediate coat - Intergard 400/Epoxy

Top coat Interthane 990 / Polyurethane

MACHINE DIMENSIONS (LXWXH) 2250 x 1450 x 1750 mm
2100 kg

Click here for the product pdf brochure