JE20-2018

The removal of dirt such as abrasives and contaminants from seagoing vessels needs to be done efficiently and effectively so as to avoid rust and corrosion or any other kind of structural damage of the vessel which can often result in severe financial losses for shipowners and operators within the maritime industry.  For this reason, the use of proper industrial strength cleaning equipment on board ships or boats is not only vital, it’s critical.

The 200 bar, 60 Hz electric drive Combijet JE20-2018 Electric Cold Water High Pressure Cleaner Electric is a 60 Hz variant of the Combijet JE20-2015 and is designed for use within the marine sector, specifically on board vessels where electric supply is commonly 60Hz.

Like the JE20-2015, the JE20-2018 has been built with a 4-pole electric motor with thermal protection and water cooling capability; full ceramic coated pistons; a brass linear pump head with built-in bypass valve; a 10 meter ultra-high pressure hose and pressure regulator; a lance with a straight jet nozzle; suction and delivery S/S valves; integrated detergent suction with suction probe, and a stainless steel trigger operated dump gun.

It has the low voltage and delayed Total Stop feature that shuts off the motor of this machine after a few seconds of non-use in order to stop the pump from running continuously and overheating.  It also comes with a mechanical temperature valve, pre-set at 45° C, which opens mechanically to release water and relieve the machine.

Operating Pressure (bar): 30-200 Bar
Operating Pressure (psi): 435 – 2900 psi
Flow Rate: 9 – 18 lpm / 2.38 GPM
Power/Voltage: 8400 W / 380V – 60Hz 3 ph
Motor Pump Type: MPW5
RPM: 1700
Inlet max. Temperature: 40° C
Machine Dimension: 50x60x107 cm
Machine Weight: 53 Kg / 117 lbs

• Water-cooled motor – keeps the motor at optimum temperatures

• Total Stop (Delayed) – shuts down the motor when pump is not in use, with a 15 second delay, protecting the unit from overheating

• Flexible coupling between motor and pump – increased lifetime of motorpump

• Gun with Rotating Coupling

• Lance with Fan Jet Nozzle

• Power Cable 5m

• High Pressure Hose 10m